Aluplast
Veka
Wood
Automatic Doors
________________________________________
Door Bellows
Door bellow, made of galvanized steel profiles, not oiled zinc plated with 275 g/m2 on both sides, according to DIN 17162 / 7 with 270mm blades. The width of 1mm thick picket, manufactured in 1.5mm sheet and plate tops of 1.25 mm. Crossarms hinge plate in 2mm, upper and lower rails 2mm thick. Joint clearances made in nylon washers, shims upper and lower nylon washers without tuning. Port to run on ball bearings, double roller in front of the door lock of the type Wausa.
Available at: Galvanized, Pre-Painted and Lacquered.
High Speed Doors PVC
Model SEDP
The best option for placement indoors, given the limited size of its mechanism. Nominated for separations between pavilions, laboratories, warehouses, etc.. Its system of internal anti-band blows gives it exceptional strength.
Model SDAN
The best option and specially designed to work at low pressures or changes in air pressure constant. Ideal for placement of outdoor spaces with connection. It is customary to put these behind closed doors of the premises. This model incorporates horizontal indents inside the reinforcing, which give a good rigidity and allow the construction of doors for most sizes available.
Structure of Ports
All our doors are manufactured with freestanding guides, profiled sheet steel wire of 2 mm thick. Supplied with galvanized finish, with the possibility of other finishes such as polyurethane paint (RAL color desired) and / or axo steel.
Canvas
All our doors are made with plastic of high quality. Resistant to wear and abrasive with excellent resistance to discoloration. All welds made in canvas, are high-frequency, ensuring the highest quality.
Industrial Solutions